Image 05 Image 01 Image 02 Image 03 Image 04

Erlebe die
Faszination Modellsport!

0 Positionen im Wert von € 0,00
Sprache: DE IT EN SI
Menü
Artikelnummer: 126172
Bezeichnung: Elektromotor 460MX Brushless Motor (1800KV)
Hersteller: Align
Herstellernummer: HML46M01
Produktbewertung:
lagernd
€ 54.99
inkl. MwSt.
>> zzgl. eventuelle Portokosten
 Stück
aktueller Lagerstand:
Lagerstand (DL): 1 rc green2
Lagerstand (Wien): 0 rc lightgrey
Aktionsgutschein? Hier einloggen.

Elektromotor 460MX Brushless Motor (1800KV)

• Continuation of Align over 25 years motor core technical knowledge and craft, based on 6S voltage, the 460MX (1800KV) motor is tailor made for the T-Rex 450L DOMINATOR, featuring superior efficiency, high power output, extreme torque, and low current, low temperature.
• As a totem to the 850MX Dominator motor, The 460MX shares the same extraordinary pedigree.
• Even for the none 3D pilots, 460MX 6S motor utilizes less than 5 amps at hover. Not only does this require smaller C-rating packs, the lower temperature extends the battery life at the same time. Charging time basically is cut in half. These advantages makes this an ideal motor for just about everyone.
• The 460MX motor incorporates radial fan in its end bell, creating powerful airflow to dissipate heat. Tweaks to motor design and reduction in weight not only contributes to dramatic power increase, the high efficiency cooling system enables cooler operating temperature during and after flights when compared to motor of previous generation.
• The 460MX motor armature had a special balance adjust to improve the serious shaking problem that other tiny motors have.
• Maintenance free, high torque, high efficiency, low temperature variant, stable and quiet.
• Japanese made high-speed ball bearings, powerful magnetic outrunner rotor.
• Battery: 22.2V, 1100~1400mAh
• Suitable for T-REX 450 series
• Must use with:
- RCE-BL45X Brushless ESC (Governer Mode) HES45X01


Specifications
• Input voltage: 6S 22,2V
• Max continuous current: 30A/45A (5sec)
• Max output power: approx. 650W/970W (5sec)
• KV value: 1800KV
• Dimension: Shaft 3.5x29.2x38mm
• Weight: approx. 87g


• Socket button head screw (M2.5x6mm) x 2
• Washer (2.6x5.8x0.6mm) x 2
• 3mm gilt terminal x 3

 Stück
Für dieses Produkt liegt noch keine Bewertung vor.

Jetzt einloggen und diesen Artikel bewerten! Login
  • Elektromotor 460MX Brushless Motor (1800KV)

    • Continuation of Align over 25 years motor core technical knowledge and craft, based on 6S voltage, the 460MX (1800KV) motor is tailor made for the T-Rex 450L DOMINATOR, featuring superior efficiency, high power output, extreme torque, and low current, low temperature.
    • As a totem to the 850MX Dominator motor, The 460MX shares the same extraordinary pedigree.
    • Even for the none 3D pilots, 460MX 6S motor utilizes less than 5 amps at hover. Not only does this require smaller C-rating packs, the lower temperature extends the battery life at the same time. Charging time basically is cut in half. These advantages makes this an ideal motor for just about everyone.
    • The 460MX motor incorporates radial fan in its end bell, creating powerful airflow to dissipate heat. Tweaks to motor design and reduction in weight not only contributes to dramatic power increase, the high efficiency cooling system enables cooler operating temperature during and after flights when compared to motor of previous generation.
    • The 460MX motor armature had a special balance adjust to improve the serious shaking problem that other tiny motors have.
    • Maintenance free, high torque, high efficiency, low temperature variant, stable and quiet.
    • Japanese made high-speed ball bearings, powerful magnetic outrunner rotor.
    • Battery: 22.2V, 1100~1400mAh
    • Suitable for T-REX 450 series
    • Must use with:
    - RCE-BL45X Brushless ESC (Governer Mode) HES45X01


    Specifications
    • Input voltage: 6S 22,2V
    • Max continuous current: 30A/45A (5sec)
    • Max output power: approx. 650W/970W (5sec)
    • KV value: 1800KV
    • Dimension: Shaft 3.5x29.2x38mm
    • Weight: approx. 87g


    • Socket button head screw (M2.5x6mm) x 2
    • Washer (2.6x5.8x0.6mm) x 2
    • 3mm gilt terminal x 3

     Stück
  • Für dieses Produkt liegt noch keine Bewertung vor.

    Jetzt einloggen und diesen Artikel bewerten! Login

Alle Preise gelten nur bei Online-Bestellung, verstehen sich falls nicht anders angegeben inkl. MwSt, sind freibleibend zzgl. Versandkosten und bei Nachnahme Übermittlungsentgelt. Irrtümer, Änderungen in Lieferumfang und Ausführung, Druckfehler und Preisänderungen vorbehalten. Durchgestrichene Preise sind Stattpreise. Abbildung kann vom Original/Lieferumfang abweichen.

* Gratis Versand bei Lieferung nach Österreich ab € 120.- Bestellwert, ausgenommen Gefahrgut, Speditionsartikel, EMS und Nachnahme

Gutscheine -
exklusiv fur Newsletterabonnenten
aktuelle Neuheiten
exklusive Angebote
Specials, Aktionen & Neuigkeiten
Informationen bequem nach Hause
 
Ich erkläre mich mit den AGB einverstanden und habe die Erklärung zum Datenschutz gelesen. Newsletter-Abmeldung jederzeit möglich.