Image 05 Image 01 Image 02 Image 03 Image 04
0 Positionen im Wert von € 0,00
Sprache: DE IT EN SI
Menü

Emax Nighthawk X4 - EMX-X-1688

Artikelnummer: 212017
Bezeichnung: Emax Nighthawk X4
Hersteller: E-Max
Herstellernummer: EMX-X-1688
Produktbewertung:
Abverkauf-Restposten: Dies ist ein Aktionsartikel
lagernd
€ 39.99
inkl. MwSt.
statt
€ 79.99
inkl. MwSt.
>> zzgl. eventuelle Portokosten
 Stück
aktueller Lagerstand:
Lagerstand (DL): 5+ rc green2
Lagerstand (Wien): 5+ rc green2
Aktionsgutschein? Hier einloggen.

Emax Nighthawk X4

The Nighthawk-X4, X5, and X6 are EMAX’s first pure X frames with equidistant motor placement and centered mass for the ultimate in balance and agility. For ultra clean builds, our team created a custom PDB with Dual Shielded Voltage Regulators, integrated XT60 battery connector, low voltage buzzer and programmable LED strip. The built-in PDB serves as the top half of the main structural frame, eliminating the need for another carbon piece to save precious weight. With all the components arranged towards the center, its center of gravity allows the X frame to turn in an instant. Different arm lengths make it convenient to change frame sizes...from 4” to 6”. Nighthawk-X6 (6” frame) “All-Up-Weight” is less than 490g with a 1000mah 4s battery, and can achieve high thrust to weight ratio.





PDB:

Built-In 5V and 12V regulators supply ample amount of clean, filtered power to the electronics.
ESC Signal pads allow clean and efficient builds with less wires to be in the way.
Programmable RGB LEDs let user play with endless colors and features through the Flight Controller using Cleanflight-Configurator.
XT60 Connector directly mounted onto the PDB (Further reducing weight by eliminating heavy wires as well as risk of cutting power leads).
Dedicated signal pads are aligned with the Flight Controller to allow clean connections.

ARMS:

Change from 170, 200, or 240mm sized frame by simply swapping out arms.
Narrow width of the face of the arms allow more thrust to pass through.
Unique motor plate design lets the user install original EMAX Nighthawk Motor Guards.

X-CRADLE (HD CAMERA MOUNT):

Adjustable HD Camera Mount clips on top of the included Top plate and locks into place. Using the screws to loosen or tighten the angle adjustment mechanism, the mount can swivel from 30-45 degrees to let your HD Cam capture the most angled speed runs.

SPECS:
170mm Motor-to-Motor distance
3mm thick arms - available in 4" length
1.5mm Bottom Carbon Fiber plate
1.5mm Top Carbon Fiber plate
1.5mm PDB

PDB Power Output: Filtered 12V @ 2A and 5V @ 3A Switching Regulators
3 Programmable RGB LEDs (Runs on 5V)
Nighthawk-X4: 85g*
Nighthawk-X5: 90g*
Nighthawk-X6: 95g*

 Stück

Technische Daten

Multicopter Typ: racecopter
Kamera Gimbal: optional
Kamera: optional
Live Bildübertragung (FPV): optional
Bausatzausführung: Kit/Bausatz
Geeignet für: Fortgeschrittene & Experten

Für dieses Produkt liegt noch keine Bewertung vor.

Jetzt einloggen und diesen Artikel bewerten! Login
  • Emax Nighthawk X4

    The Nighthawk-X4, X5, and X6 are EMAX’s first pure X frames with equidistant motor placement and centered mass for the ultimate in balance and agility. For ultra clean builds, our team created a custom PDB with Dual Shielded Voltage Regulators, integrated XT60 battery connector, low voltage buzzer and programmable LED strip. The built-in PDB serves as the top half of the main structural frame, eliminating the need for another carbon piece to save precious weight. With all the components arranged towards the center, its center of gravity allows the X frame to turn in an instant. Different arm lengths make it convenient to change frame sizes...from 4” to 6”. Nighthawk-X6 (6” frame) “All-Up-Weight” is less than 490g with a 1000mah 4s battery, and can achieve high thrust to weight ratio.





    PDB:

    Built-In 5V and 12V regulators supply ample amount of clean, filtered power to the electronics.
    ESC Signal pads allow clean and efficient builds with less wires to be in the way.
    Programmable RGB LEDs let user play with endless colors and features through the Flight Controller using Cleanflight-Configurator.
    XT60 Connector directly mounted onto the PDB (Further reducing weight by eliminating heavy wires as well as risk of cutting power leads).
    Dedicated signal pads are aligned with the Flight Controller to allow clean connections.

    ARMS:

    Change from 170, 200, or 240mm sized frame by simply swapping out arms.
    Narrow width of the face of the arms allow more thrust to pass through.
    Unique motor plate design lets the user install original EMAX Nighthawk Motor Guards.

    X-CRADLE (HD CAMERA MOUNT):

    Adjustable HD Camera Mount clips on top of the included Top plate and locks into place. Using the screws to loosen or tighten the angle adjustment mechanism, the mount can swivel from 30-45 degrees to let your HD Cam capture the most angled speed runs.

    SPECS:
    170mm Motor-to-Motor distance
    3mm thick arms - available in 4" length
    1.5mm Bottom Carbon Fiber plate
    1.5mm Top Carbon Fiber plate
    1.5mm PDB

    PDB Power Output: Filtered 12V @ 2A and 5V @ 3A Switching Regulators
    3 Programmable RGB LEDs (Runs on 5V)
    Nighthawk-X4: 85g*
    Nighthawk-X5: 90g*
    Nighthawk-X6: 95g*

     Stück
  • Technische Daten

    Multicopter Typ: racecopter
    Kamera Gimbal: optional
    Kamera: optional
    Live Bildübertragung (FPV): optional
    Bausatzausführung: Kit/Bausatz
    Geeignet für: Fortgeschrittene & Experten

  • Für dieses Produkt liegt noch keine Bewertung vor.

    Jetzt einloggen und diesen Artikel bewerten! Login

Alle Preise gelten nur bei Online-Bestellung, verstehen sich falls nicht anders angegeben inkl. MwSt, sind freibleibend zzgl. Versandkosten und bei Nachnahme Übermittlungsentgelt. Irrtümer, Änderungen in Lieferumfang und Ausführung, Druckfehler und Preisänderungen vorbehalten. Durchgestrichene Preise sind Stattpreise. Abbildung kann vom Original/Lieferumfang abweichen.

* Gratis Versand bei Lieferung nach Österreich ab € 120.- Bestellwert, ausgenommen Gefahrgut, Speditionsartikel, EMS und Nachnahme

Gutscheine -
exklusiv fur Newsletterabonnenten
aktuelle Neuheiten
exklusive Angebote
Specials, Aktionen & Neuigkeiten
Informationen bequem nach Hause
 
Ich erkläre mich mit den AGB einverstanden und habe die Erklärung zum Datenschutz gelesen. Newsletter-Abmeldung jederzeit möglich.